Comodo SSL
ADD SOMETHING HERE...
SKU: ATZ HDMI-E200W Category:

ATZ HDMI-E200W

$450.00


HDMI Wireless Extender 200M


Share it:
  1. INCREASE YOUR VIEWING RANGE: Transmitter and Receiver wirelessly sends HDMI A/V signals up to 200m through line-of-sight environments; works with most HDMI-equipped devices, including blu-ray players, set-top boxes, AV receivers, cable/satellite boxes, and computer systems.
  2. BUILT-IN IR REMOTE CONTROL: Built-in IR signal extension feature allows you to control the playback device remotely. Imagine you have a DVD player in your media room and a TV in your living room, while you are in the living room, you can still use your DVD remote to control the DVD player with IR CONTROL EXTENSION function.
  3. UNCOMPROMISED VIDEO QUALITY: Supports vivid, high-definition videos up 1080p @60Hz. Compatible with HDCP 1.2 (High-bandwidth Digital Content Protection); best used for TV/video applications rather than computers or real-time applications; Note: A delay of less than 0.5 seconds might occur due to data compression- Not recommended using for PC gaming.

The extender uses TCP /IP standard Wireless Transport Protocol, so it has high transmission rate and strong anti-interference capability. It has HDMI loop-out port with IR capability to control source devices remotely. The HDMI Wireless Extender is widely applicable for office presentation, lecture, education, conference, family entertainments etc.

Features:

  • Contains a transmitter (TX) and a receiver (RX). The HDMI signal over wireless transmission from the transmitter to the receiver
  • The TX support one HDMI loop output, for local screen monitor
  • Support HDMI resolution: 480P~1080P@50/60Hz and SVGA~WUXGA
  • Use the internationally accepted 5G ISM frequency band, high transmission rate and strong anti-interference capability
  • Using an external dual – gain antennas. Full HD 1080p transmits up to 200 meters wireless in open space.( May be affected by the use environment)
  • Extends wide-band infrared remote to control source device from display side
  • Support OSD, for informed of device status
  • Simple Plug and Play, no software installation required
  • Supports both panel settings and Web Configuration Interface, Simple and easy to use

*Remarks: For export only, not for use in Singapore

Transmitter Unit 1x HDMI input + 1x HDMI loop out
Reciever Unit 1x HDMI output
HDMI resolution Up to 1080p@50/60Hz
HDMI Audio Format LPCM2.0/48KHz/16Bit
HDMI Max bandwidth 225MHz
HDMI Max baud rate 6.75Gbps
Input/Output TMDS signal 0.5~1.5Volts p-p(TTL)
Input/Output DDC signal 5Volts p-p (TTL)
HDMI output cable distance ≤15m AWG26 HDMI standard cable
Antenna type External dual 3dBi gain antenna
Wireless standard IEEE 802.11a/b/g/n
Wireless Band 5G ISM Band
Operational range Up to 200M in open space
Latency (delay) <200 ms
IR Carrier frequency 20-60KHz
Video compression Comparable with H.264
Max Data rates 2T2R up to 300Mbps
Transmit Output Power(IPEX) 20dBm Max
IR Carrier frequency 20-60KHz
TX/RX Max working current 1A
Power adapter format Input AC 100V~240V 50HZ/60Hz, DC5V/2A
Operating Temperature range -5 to +45℃
Storage Temperature range -20 to +60℃
Operating Humidity range 10 to 90%RH (No Condensation)
Storage Humidity range 5 to 95%RH (No Condensation)
Case Dimension (L x W x H) 127.5×127.5×25 (mm)
Weight TX163g/ RX160g
Navigation

WISHLIST

Close
Viewed

RECENTLY VIEWED

Close